To Place A Call On Exclusive Hold; To Hold A Call - NEC UNIVERGE DT300 Series User Manual

TO HOLD A CALL

Press HOLD key. Held line wink flashes.
HOLD
4:26 PM
Note:
If held line appears on other DT Series stations,
the associated LED flashes red slowly.
To Retrieve
Lift handset or press
Press held line. Use handset to converse.
Note:
Any station with this line appearance can retrieve
the call.
If unanswered
After preprogrammed time, Automatic Recall is initi-
ated.
Visual and audible signal (rapid flash and ring
burst) is sent to station that placed call on hold.
DT300 Series
Held station
number
2001
TUE 13 APR 2004
key.
Speaker
Note: Hold shows as a flashing green LED on your
phone. The same line on other phones shows as a
flashing red LED. Recall shows as a flashing
green LED on your phone and flashing red LED on
other phones with the same line.
TO PLACE A CALL ON EXCLUSIVE
HOLD
DT300 Series
Press HOLD key twice. Line appearance indi-
cates interrupted wink.
E_HOLD
4:26 PM
Note:
If held line appears on other DT Series stations,
LED remains steadily lit red.
To Retrieve
Lift handset or press
Press held line. Use handset to converse.
Note:
Only the DT Series that set Exclusive Hold option
can retrieve the call.
Held station
number
2001
TUE 13 APR 2004
Speaker key.