Terminal Setup With The Feature Key - NEC NEAX7400 ICS M110e User Manual

TERMINAL SETUP WITH THE FEATURE KEY

MICROPHONE ON/OFF
The MIC lamp shows the status of the built-in microphone.
To change microphone status:
Press Feature and 1 to turn the microphone from on to off, or from off to on.
TO SELECT RINGER TONE
The D term Series E has 3 kinds of ringer tones that you can select.
Press Feature and 3. The LCD
displays the selected tone
number (n=1 ~ 3).
Tone No.
1
2
3
TO ADJUST RINGER TONE
NOTE: Access to feature is based on data assignment.
Press Feature and 0.
Ringer activates.
Press 3.
The LCD displays the selected tone
number (n=1~3).
Press 3. Next tone is selected.
Frequency
(Hz)
480/606
480/606
1285/1024
6
RINGER TONE
(Time Display)
Modulation
(Hz)
16
8
16
RINGER TONE
(Time Display)
RINGER TONE
(Time Display)
n
n
n