Advertisement
Quick Start:
Install the safety tether key on the computer and then press the Master Power Switch that is located at the front of the treadmill to
ON position. The computer is in the SCAN mode now. Press the START/STOP button and then press the FAST button, the running
belt starts moving with the speed at 0.8km. You may press the FAST or SLOW button to increase or decrease the running speed.
Each increment or decrement is 0.2 km/h. The speed range is from 0.8km/h to 12kms/h. Press the MODE button to select function
of SCAN, TIME, SPEED, DISTANCE or CALORIES for displaying on the screen.
Button Functions:
START/STOP
To start or stop training.
MODE
To select function of SCAN, TIME, SPEED, DISTANCE or CALORIES during exercise. To select function of
TIME, DISTANCE or CALORIES for target presetting in standby mode. Press the MODE button for 5 second
will reset the function value of TIME, DISTANCE or CALORIES to zero for target presetting.
SET
To set functions of TIME, DISTANCE and CALORIES for target presetting.
FAST
Speed up adjustment during all training period on different training mode.
SLOW
Speed down adjustment during all training period on different training mode.
11
Advertisement
