Repeat Redial
To use Repeat Redial (if the outside party you call is
unavailable or busy):
1.
Place a trunk call.
Note:
Listen for busy tone or Ring-No Answer.
2.
Press the Feature + Redial keys.
-OR-
Press the Repeat Redial key (Service Code 851:29).
The Repeat Redial key flashes while you wait
Note:
for the system to redial.
3.
Press the Speaker key to hang up.
The system periodically redials the call.
Note 1:
System programming determines the waiting
Note 2:
time and the number of redial attempts.
4.
Lift the handset when the called party answers.
Note:
When using trunks with answer supervision,
the Repeat Redial feature automatically
cancels.
Line 001
Repeat Dial
Conf Rpt Save
To cancel Repeat Redial:
1.
2.
Press the Repeat Redial key (Service Code 851:29).
Caller ID
Answer
Receive incoming ringing or a transferred outside call:
1.
name or number.
2.
Temporary Memory
An unanswered call will cause the Call History key
(Service Code 851:08) to flash, indicating a new call
has been placed in the temporary memory. If enabled
in programming, the telephone's display will show:
"CHECK LIST".
00:27
35
Press the Feature key.
Press the Redial key.
-OR-
2-14 THU 3:15PM
Cancel Repeat Dial
List
Dir
Review the telephone display for the calling party's
Answer the call accordingly.
Line 001
NEC America 2142622000
Conf
Dir
ICM
Prog
ICM
Prog