NEC Univerge DT310 User Manual page 19

1.
(5) Soft Keys
Any feature shown at the bottom of the LCD is
available. The appropriate feature key is displayed
on the screen according to the call handling
process.
(6) Help
Explanations of the Soft Keys can be called up on
the LCD by pressing this key.
(7) 8LD Display
(a) (b)
Rachel
Ben
Hannah
James
Page Switching Key
32 (8 keys x 4 pages) additional programmable
keys are provided. They can be programmed as
Flexible Line/Programmable feature key by
Telephony Server Administrator, similar to existing
programmable keys. When Telephony Server
Administrator sets "One-Touch Speed Dial key" on
the programmable keys, users can assign any
numbers (ex. Telephone number, etc.) to the key
(up to 8 digits).
(C) (b) (a)
Julia
1
FDA
2
FDN
3
4
Paul
Scroll
* Maximum 8 characters can be displayed.
** The users can change the name displayed on
the LCD. For the operating procedure, refer to To
Register Name On One-Touch Speed Dial key.
*** For the assignment of the keys, confirm to the
Telephony Server Administrator.
(a) Icon
Status of the Line key such as Call termination,
Call Hold or Busy, and setting on the Feature key
are shown as Icons.
User's Status
• Idle
• Call Hold (Individual Hold on Call
Park Group)
• Exclusive Call Hold
• Call Hold (Individual Hold/
Individual Hold on Call Park Group)
• Recall (Individual Hold/Exclusive
Call Hold/Call Transfer/
• Individual Hold on Call Park
Group)
• Recall (Other Party Hold/Other
Party Hold on Call Park Group)
• Incoming Call
• During Conversation (Individual
Use)
• Call Transfer
• Conference
11
Flashing
Icon
Pattern
Blink
Note
Blink
Note