Unpacking And Placing The Unit - M2TECH YOUNG DSD User Manual

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.1 – march 2014

1. Unpacking and Placing the Unit

Lay the box on a table and open it by separating it from the external paperwork and
removing or cutting the adhesive tape seal. The following items are included:
• one YOUNG DSD;
• one wall wart (AC-to-DC adapter);
• one USB A-B cable;
• two XLR-RCA high quality adaptors;
• one remote control;
• this manual.
Should one or more item be missing, please contact your retail dealer.
Remove the YOUNG DSD from the foam enclosure and place it onto a stable base, far
from heat sources. Avoid full sunlight on the unit. Allow for ample room around the
unit for venting.
The YOUNG DSD is a high efficiency device; therefore it doesn't produce relevant heat
during its operation. Regardless, it's recommended to guarantee an adequate air flow
around the unit. Moreover, every time it will mainly be operated by remote control, it's
recommended to place it so as the remote control's infrared signals can easily reach
its front panel.
Avoid smoke, moisture, dirt and liquids from reaching the unit. Please note that any
signs of abuse will void warranty coverage.
9
M2Tech
www.m2tech.biz
Copyright © 2014, M2Tech Srl