Connecting And Powering The Unit - M2TECH YOUNG DSD User Manual

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.1 – march 2014

5. Connecting and Powering the Unit

WARNING: All connections between the YOUNG DSD
be made when all units are turned off and completely powered down or
unplugged. Failing to do so may cause damage to the YOUNG DSD
units.
Please refer to chapter 3, "Back Panel".
Connect the digital sources (CD/SACD/DVD player, satellite receiver, DAB receiver)
to the inputs (Figure 2, 6-9).
Connect your computer to the YOUNG DSD USB input (Figure 2, 10).
If you want to use the YOUNG DSD as a preamplifier, connect the analog outputs to
the inputs of a power amplifier; otherwise connect the outputs to a pair of inputs on
an integrated amplifier or preamplifier (Figure 2, 5).
Connect the plug from the stock wall wart to the YOUNG DSD power input (Figure 2,
11).
Connect the wall wart to a mains outlet. The wall wart (AC-to-DC adapter) will
automatically accept any voltage from 90V
Switch the YOUNG DSD on by pushing the front panel button (Figure 1, 1).
NOTE: whenever the YOUNG DSD
switch the power amplifier on after switching the YOUNG DSD
the power amplifier off before switching the YOUNG DSD
YOUNG DSD is used as a preamplifier, it is a good habit to
YOUNG DSD YOUNG DSD
YOUNG DSD and other equipment must YOUNG DSD YOUNG DSD
YOUNG DSD YOUNG DSD and/or other YOUNG DSD
to 265V .
AC AC
YOUNG DSD on, and to switch YOUNG DSD YOUNG DSD
YOUNG DSD off.
YOUNG DSD YOUNG DSD
17
M2Tech
www.m2tech.biz
Copyright © 2014, M2Tech Srl