Choosing Volume Mode - M2TECH YOUNG DSD User Manual

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.1 – march 2014

7.9. Choosing Volume Mode

The YOUNG DSD listening level can be displayed in two fashions: either in deciBels or
in steps. Moreover, it is possible to freeze the listening level to the current value (this
is useful when the YOUNG DSD is used as a true source connected to a preamplifier or
integrated amplifier).
In decibel mode, the maximum level is 0dB, while negative values with increasing
magnitude indicate decreasing listening levels. For example, a listening level of -
15dB is higher than a listening level of -20dB.
In steps mode, the maximum listening level is 192, while positive values with
decreasing magnitude indicate decreasing listening levels. For example, a listening
level of 40 will be higher than a listening level of 30.
This feature is displayed as in Fig 10. The example shows that the current volume
mode is in deciBels. Other modes are indicated by "STEPS" and "DISABLED".
NOTE: Choosing one mode or the other doesn't change the way the volume is
actually set: the YOUNG DSD YOUNG DSD allows for a setting between 0 and -96dB in 0.5dB YOUNG DSD YOUNG DSD
VOLUME MODE
DECIBELS
Figure 10
28
M2Tech
www.m2tech.biz
Copyright © 2014, M2Tech Srl