Troubleshooting Guide - Spektrum AR6410T User Manual

EN
7. The LED on the receiver will go solid and within 5 seconds the LED will flash 3
times quickly, indicating the option is now changed
8. Disconnect battery from receiver
9. Turn transmitter off
Mode 1
THRO/RUDD ELEV/AILE

Troubleshooting Guide

Problem
Aircraft will
not "throttle
up"but all other
controls seem
to function.
LED on aircraft
remains
flashing and
cannot be
controlled by
transmitter.
CH5/X-port
1. Full THRO
2. Right RUDD
Possible Cause
User did not lower throttle
trim and throttle stick prior
to initializing theaircraft.
Throttle channel is reversed.
Note: Futaba transmitters
(equipped with Spektrum
modules) may require
you to reverse the throttle
channel.
User did not wait at least
5 seconds after powering
the transmitter prior to
connecting the flight battery
to the aircraft.
User bound the aircraft to a
different transmitter.
Transmitter was too close
to aircraft during the
initialization process
ELEV/RUDD THRO/AILE
Solution
Lower throttle stick and
throttle trim to their lowest
settings.
Reverse throttle channel
on specific transmitter if
applicable.
Unplug, then reconnect
flight battery.
Rebind aircraft to your
desired compatible
transmitter.
Rebind aircraft to your
desired compatible
transmitter.
Move transmitter
(powered on) a few feet
from the aircraft prior to
reconnecting the flight
battery.
12
Mode 2