Spektrum AR6410T User Manual page 10

EN
5. While holding this position, plug the battery into the receiver; power receiver
6. The LED on the receiver will go solid and within 5 seconds the LED will flash 3
times quickly, indicating servo is now reversed
7. Disconnect battery from receiver
8. Turn transmitter off
Mode 1
THRO/RUDD ELEV/AILE
THRO/RUDD ELEV/AILE
THRO/RUDD ELEV/AILE
Reversing Optional Linear Servos
Reversing the servo is useful when implementing certain installations, such
as dual ailerons, flaps, etc. Spektrum offers a servo reversing lead that can be
plugged between the receiver and the optional servo.
To safely accomplish advanced programming feature changes, please enlist the
use of a helper. One to hold the aircraft to prevent unintended flyaways, and one to
make the changes on the transmitter.
To reverse the servo using the reversing lead:
1. Plug the reversing lead into the servo
2. Plug servo into CH2 or Reversed CH2/CH6 ports
3. Power receiver using a charged battery
4. Once receiver connects, the servo is now reversed
5. Disconnect battery from receiver
6. Remove servo reversing lead and store it in a safe place for future use
7. Reinstall servo lead into servo port
CH2
1. Full THRO
2. Down ELEV
3. Left AILE
CH3
1. Full THRO
2. Down ELEV
3. Right AILE
CH4
1. Full THRO
2. Up ELEV
3. Right AILE
10
Mode 2
ELEV/RUDD THRO/AILE
ELEV/RUDD THRO/AILE
ELEV/RUDD THRO/AILE