D Mounting The Transceiver; Ioptional Ut-109/Ut-110 Installation - Icom IC-F610 Instruction Manual

Uhf trunked radio

Hide thumbs Also See for IC-F610:

Table of Contents

D Mounting the transceiver

The universal mounting bracket supplied with your transceiv-

er allows overhead mounting.

• Mount the transceiver securely with the 4 supplied screws

to a thick surface which can support more than 1.5 kg.

Flat washer

Spring washer

When using

self-tapping screws

CONNECTION AND MAINTENANCE

I Optional UT-109 /UT-110

installation

q Turn power OFF, then disconnect the DC power cable.

w Unscrew the 4 screws, then remove the bottom cover.

e Cut the print pattern on the PCB at the TX mic circuit (A)

and RX AF circuit (B) as shown in the following ﬁgure.

r Install the scrambler unit as shown in the following left.

t Return the bottom cover and screws to the original posi-

tion.

• Install the unit

• Cut the print pattern

NOTE: Be sure to re-solder the above dis-

connected points, otherwise no TX modu-

lation or AF output is available when you

remove the scrambler units.

Front panel

Table of Contents

Do you have a question about the IC-F610 and is the answer not in the manual?