D Reception Of A Status Call - Icom IC-F610 Instruction Manual

➥ In the case of a call received from the Inter-Prefix,
'INTER-PFIX' is displayed on the LCD screen.
➥The communication time timer will appear on the dis-
play.
TIME 00 56
w The individual ID will appear if 'Display Pressel' function
is enabled, and remain displayed during the current
communication.
e Pushing [PTT] will allow you to talk with the caller.
➥In the case of a group call, the communication only
can be cleared down from the caller's side. The called
station cannot clear down the communication.
D D Reception of a Status Call
When a status call is received, a beep sound is heard.
q The LCD screen displays the text corresponding to the
status number and the caller's individual code.
STATUS 01
w These text and the individual numbers remain until
[Clear] is pushed.
e If you push [Clear] to cancel the displayed status call,
the transceiver returns to the waiting mode.
302
D D Reception of a SDM (Short Data Message) Call
When the Short Data Message is received, a beep sound
is heard.
q The LCD screen displays the received data and the
caller's individual code, and then the display blinks.
w Push [
]/[ ] to display the following data when over
10 digits of data has been received.
e No transmission can be made until the displayed data
message is cancelled by pushing [Clear].
r If you push [Clear] to cancel the displayed short data
message, the transceiver returns to the waiting mode.
RECEIVING
(DATA)
302
3
14