SECTION 3
• Opening case and remove the front panel
➀
Unscrew 4 screws A, and remove the bottom cover.
➁
Disconnect the flat cable B from J2.
➂
Disconnect the cable C from J7.
➃
Unscrew 2 screws D , and remove the front unit in the
direction of the arrow.
B
• Removing the main unit
➀
Unscrew 8 screws E.
➁
Remove the filter case F.
➂
Unscrew the screw G.
➃
Unsolder 3 points H from the antenna connector.
➄
Unsolder 4 points I from IC3.
E
DISASSEMBLY INSTRUCTIONS
A
J2
J7
C
D
F
H
I
G
➅
Lift up the front portion of the main unit and remove it.
• Installation location
UT-108
DTMF decoder unit
UT-109
Voice scrambler unit
UT-110
OPC-617
ACC cable (for external terminal connection)
UT-108
UT-109
UT-110
J1
3 - 1
OPC-617
J6