Installer Programmable Features - Excalibur RS-350-EDPB Operation Manual

installer Programmable Features

This group of Installer Programmable Features are all accessed as a group in the second level of
features' programming� These features have a direct affect upon the system's operations related
to the installation and vehicle type anD SHOulD Only be CHangeD by THe inSTaller!!!
Feature #1 - Doorlocking Functions
0.8 Second Outputs
3 Second Outputs
Double Pulse unlock Output (press "trunk" button to program)
Total Closure lock Output
This single feature gives the installer several needed options, to match the system's doorlocking
outputs to suite different vehicle requirements. The total closure setting provides a 28 second lock
pulse and a 0�8 second unlock pulse�
Feature #2 - light relay Functions
Dome light Output
Door lock
ignition Output
accessory Output
The system has two built-in relays, which can be programmed to perform several different func-
tions� The primary function of this relay, is to operate the vehicle's dome, or interior lighting as
part of the system's operations� Optionally, if desired or needed, this relay can be programmed to
be a door lock relay, or as medium-capacity ignition or accessory outputs (10A max), if needed for
remote starting use�
Feature #3 - Horn relay Functions
Horn Output
Door unlock
Trunk release
Pulse after Start
The primary function of this second relay, is to operate the vehicle's existing horn; either in
conjunction with the electronic siren, or in place of the siren� Using both the siren and the horn
creates an extremely effective security system� Optionally, if desired or needed, this relay can be
programmed as a door unlock, trunk release, or pulse after start relay�
Feature #4 - Turbo Timer
Off (press "lock" button to program) - DeFaulT
run 1 minute (press "unlock" button to program)
run 2 minutes (press "trunk" button to program)
run 3 minutes (press "start" button to program)
This feature, the operation of which is described on page 9, when turned on
configures the system to automatically keep the engine running briefly after it is turned off. This
operation is designed specifically for vehicles having turbocharged engines (the user may tempo-
rarily bypass the feature if desired)� This feature should only be programmed by the installer,
and the operation of this feature depends on the correct connection of the safety wire to the
vehicle's parking brake�
Feature #5 - manual Transmission mode
Off (press "unlock" button to program) - DeFaulT
On (press "lock" button to program)
This feature changes the parameters of the system's remote start operation to be suitable for
manual transmission-equipped vehicles via a "setup" procedure which must be followed upon exit-
ing the vehicle to ensure the transmission is in neutral�
16
(press "lock" button to program) - DeFaulT
(press "unlock" button to program)
(press "start" button to program)
(press "lock" button to program) - DeFaulT
(press "unlock" button to program)
(press "trunk" button to program)
(press "start" button to program)
(press "lock" button to program) - DeFaulT
(press "unlock" button to program)
(press "trunk" button to program)
(press "start" button to program)