Assembling The Blades - Hunter Type 3 Owners And Installation Manual

2-1. Turn the fan over and place in one of the holes in the
upper packaging.
2-2. Insert blade through housing.
Note: Each blade will only install one way and will have a red
dot on the bottom of the blade. It should face you during
blade installation or downward once fan is hung.
2-3. Attach each blade to the fan using two blade grommets
and two blade assembly screws.
Note: The blades on this fan have been treated
with Hunter's Dust Armor protection, making
the blades less likely to attract dust and dirt.
Use a dry or slightly damp lint free cloth to
clean the blades. Do not use a furniture polish
or any other cleaners that leave any residue, as
they will damage the protective Dust Armor
on the blades.
2 • Assembling the Blades
7
42488-01 • 12/21/11 • Hunter Fan Company
Step 2-1
Step 2-2
Red Dot
Step 2-3