Changing The Saw Blade; Moving The Saw - Titan TTB236MSW Safety And Operating Manual

Fig 20
Fig 21
Blade
Flange
securing bolt
Fig 22
TITAN 210MM SLIDING COMPOUND MITRE SAW

CHANGING THE SAW BLADE

Warning: Disconnect the saw from
the power supply.
Engage the arbor lock and loosen and remove the
blade securing bolt and outer blade flange using a
suitable hex key (see fig. 20 & 21).
NOTE: The blade securing bolt has a left hand
thread. We recommend that the operator
considers wearing a pair of protective gloves when
handling or changing the blade.
Clean any sawdust and debris from the arbor and
the saw blade securing flanges.
To refit the blade, follow the above procedure in
reverse order. Refit blade as shown (see fig. 22).
Ensure that the arbor lock is disengaged once the
blade is correctly fitted.

MOVING THE SAW

When transporting the saw between locations
make sure that:
1) The saw head is locked in the down position.
2) The rotary table lock handle, the tilt head
clamping knob and the slide locking lever are all
securely tightened.
3) Use the transportation handle cut-outs on either
side of the machine base to lift the saw. Do not lift
the saw by the switch handle alone.
TTB236MSW