Technical Data; Noise And Vibration Data - Titan TTB236MSW Safety And Operating Manual

TECHNICAL DATA

Volts: 230V~50Hz
Power input: 1400W
No-load speed: 5000min-1
Double insulation:
Net weight: 10kg
Blade: Ø210 mm ; Ø30 mm Bore
Turntable Ø250 mm
Mitre stops 0°,15°, 22.5°, 30°, 45° left & right
Mitre angle range 45° left & right
Bevel angle range 0° to 45° left
Maximum capacity
Cross cut 63mm x 233mm
Mitre cut at 45° 46mm x 233mm
Bevel cut at 45° 63mm x 117mm
Compound cut at 45° 46mm x 117mm Left

NOISE AND VIBRATION DATA

Sound pressure level LPA: 94 dB(A) (K=3dB(A))
Sound power level LWA: 107 dB(A) (K=3dB(A))
Vibration level: 3.384m/s
- The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another.
- The declared vibration total value may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual use of the power tool can differ from
the declared total value depending on the ways in which the tool is used; and of the
need to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating
cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
ACCESSORIES
Allen Key 1 pc, Dust Bag 1 pc, Hold-Down Clamp 1 pc & Mitre Handle 1 pc
TITAN 210MM SLIDING COMPOUND MITRE SAW
2 2
(K=1.5m/s )
TTB236MSW