Adjusting The Pitch Of Audio - Yamaha Disklavier E3 Operation Manual

■ Adjusting the Voice Balance
1
Press [BALANCE] three times on the remote control.
The voice balance setting screen appears.
×3
2
Press [+/YES] and [–/NO] to adjust the volume of the voice.
Voice volume can be adjusted in a range of 0 to 127.

Adjusting the Pitch of Audio

During playback [FUNC.]
You can temporarily adjust the pitch of the song contains audio
(PianoSoft·PlusAudio, SmartPianoSoft) or an audio CD for your listening
pleasure.
Pitch adjustments are effective until another medium or album is selected,
recording is started, or the Disklavier is turned off.
1
During the song playback, press [FUNC.] on the remote
control.
The audio pitch setting screen appears.
=CD=
AudioPitch=+00cent
2
Press [+/YES] and [–/NO] to change the audio pitch.
=CD=
AudioPitch=+01cent
Audio pitch can be adjusted in a range of –50 cent to +50 cent (one
semitone as 100 cents).
=BALANCE= -/+
VOICE BALANCE 100
-+ENT
-+ENT
Advanced Song Playback
Note:
You can also use the dial on the
control unit to adjust the volume.
Note:
This function cannot be used to
adjust the pitch of external audio
CDs connected to the OMNI IN
jacks.
Chapter
4
33