Copying Song File From A Personal Computer To The Disklavier - Yamaha Disklavier E3 Operation Manual

Chapter
8
Media Management

Copying Song File from a Personal Computer to the Disklavier

You can copy song files from a Windows or Macintosh computer to a
special folder on the Disklavier called [FromToPC] and then play them on
the Disklavier.
1
Connect the control unit to a LAN (local area network) to
which a personal computer with a song file is also
connected.
Personal computer
LAN
84
Router
Control unit
Note:
Copy-protected files, such as
PianoSoft and PianoSoft·Plus songs,
cannot be copied to the [FromToPC]
folder.
Note:
Do not copy the files other than
Disklavier song files.
Note:
Do not access the [FromToPC]
folder while the Disklavier is
engaged in another operation (such
as file copying or deleting).
Note:
It is necessary to configure the
Disklavier properly for network
communications by enabling it to
get a DHCP IP address
automatically (recommended) or by
assigning an appropriate address
manually. The procedure is the same
as the one used for setting up the
Disklavier for Internet
communications. Please follow the
instructions in Chapter 9 "Internet
Direct Connection (IDC) – Setting
the Disklavier for the Internet
Connection" on page 99.
Note:
Use an STP (shielded twisted pair)
cable for connection. For details, see
Chapter 9 "Internet Direct
Connection (IDC) – Connecting the
Disklavier to the Internet" on
page 93.
Note:
For information about configuring a
personal computer for network
communications, please refer to the
documentation that came with the
computer.