Table of Contents
Advertisement
o The minimum setting is at the end of the anti-clockwise rotation
of the control knob.
o All operation positions must be selected between the maximum
and minimum position.
o Never select a knob position between the maximum and off
position.
o The symbol on the control panel, next to the control knob will
indicate which gas burner it operates.
Automatic ignition with flame failure safety device
The appliance is fitted with a flame failure safety device on each
burner, which is designed to stop the flow of gas to the burner head in
the event of the flame going out.
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the maximum position.
o If you keep the control knob depressed, the automatic ignition
for the burner will operate.
o You should hold down the control knob for 20 seconds after the
flame on the burner has lit.
o After this 20 second interval, turn the control knob to your
required setting between the maximum and minimum setting
symbols.
o To switch the burner off, turn the control knob fully clockwise to
the gas off position.
o In case of power failure, the burners can be lit by carefully using
a match.
Energy saving tips
Wok
Rapid
Semi-rapid
Auxiliary
BURNERS
Minimum
diametre
220 mm
180 mm
120 mm
80 mm
PANS
Maximum
diametre
260 mm
220 mm
200 mm
160 mm
14
Advertisement
Table of Contents
