Automatic Ignition (B70.1Bl, B72Bl, B77Bl); Automatic Ignition With Flame Failure Safety Device - Baumatic AS26SS Instruction Manual

o The symbol on the control panel, next to t
indicate which gas burner it operates.
A utomatic ignition (B70.1BL, B72BL, B77BL)
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the m
o If you keep the control knob depressed, the automatic ignition
for the burner will operate.
o Once the burner is lit, turn the control knob to your required
setting between the m
o To turn the burner off, turn the control knob fully clockwise to
the gas of f position.
o In case of power failure, the burners can be lit by carefully using
a match.
Automatic ignition with flame failure safety device (AS26SS,
B26SS, B40, B71TCBL, B72TCBL/W, B77TCBL, B78BL,PHG602)
T he appliance is fitted with a flame failure safety device on each
burner, which is des
th e event of the flame going out.
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the m
o If you keep the control knob depressed, the automatic ignition
for the burner will operate.
o You should hold down the control knob for 20 seconds after the
flame on the burner has lit.
o After this 20 second interval, turn the control knob to your
required setting between the maximum and minimum setting
symbols.
o In case of power failure, the burners can be lit by carefully using
a match.
o To turn th e burner off, turn the control knob fully clockwise to
the gas off position.
aximum position.
aximum and minimum setting symbols.
igned to stop the flow of gas to the burner head in
aximum position.
he control knob will
21