Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Baumatic BHG642R
Summary of Contents for Baumatic BHG642R
- Page 1 BHG642R 60 cm Gas on glass hob...
- Page 2 User Manual for your Baumatic BHG642R 60 cm Gas on glass hob NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
ontents Enviro nmental note mportant safety information 5 – 7 pecifications 8 – 9 roduct and aperture dimensions roduct specifications lectrical details as details as hob surface layout sing the gas hob 10 - 11 efore first use Switching the hob on Automatic ignition with flame failure device 10 - 11 Energ... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
You should not use this appliance to store items on or as a work surface. o No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made... - Page 6 Child Safety o Baumatic strongl y recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will be ho o If it is necessary for younger family members to be in the...
- Page 7 British Standards. Please see the specific section of this booklet that refers to installation. o Baumatic Ltd. declines any responsib ility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
-
Page 8: Specifications
Specifications Product dimensions: Aperture dimensions: Depth: 500 mm Depth: 480 mm Width: 585 mm Width: 560 mm Height: 38 mm Product specifications: o 1 x 3.00 kW rapid burner o 2 x 1.75 kW semi-rapid burners o 1 x 1.00 kW auxiliary burner Front control operation o Automatic ignition o Heavy duty cast iron pan stands... -
Page 9: Gas Details
Gas details Connection: Rp ½ (ISO R7) Type: Natural Gas (20.9 mbar) Alternative LPG G30 (28-30 mbar) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. -
Page 10: Using The Gas Hob
Using the gas hob Before first use IMPORTANT: You should clean the hob surface (see “Cleaning and maintenance” section). Switching the hob on The following symbols will appear on the control panel, next to each ontrol knob: = gas off Large flame: maximum setting Small flame: minimum setting o The minimum setting is at the end of the anti-clockwise rotation... -
Page 11: Energy Saving Tips
o You should hold down the control knob for 20 seconds after the me on the burner has lit. o After this 20 second interval, turn the control knob to your required setting between the maximum and minimum setting symbols. o To switch the burner off, turn the control knob fully clockwise to the gas o ff position. -
Page 12: Cleaning
Cleaning Cleaning operations must only be carried out when the hob is cool. The applian ce should be disconnected from your mains supply before commencing any cleaning process. Cleaning the hob top Any residues that are left on the hob top surface from cleaning agents will damage it You should remove a ny residues with... -
Page 13: Maintaining The Cast Iron Pan St Ands
IEE Wiring Regulations Electricity at Work Regulations BS 6172 o Installation of Domestic Gas Cooking Appliances (if necessary, BS 5482 Installation of Domestic LPG Appliances) o BS 5440 Installation of Flues and Ventilation for Gas Appliances o Baumatic Ltd Installation Instructions... -
Page 14: Positioning
U npacking the appliance When unpacking the appliance please check that the following items are contai ned within the packaging: x Baumatic hob an stands urner assemblies Instruction manual Baumatic warranty card ixing screws... -
Page 15: Installing The Appliance
Installing the appliance o Cut a hole in the worktop that corresponds with the illustration above. o IMPORTANT: You must have a gap of at least 25 mm between the underneath of the appliance and any surface that is below it. o Carefully turn the hob upside down and place it on a cushioned mat. -
Page 16: Gas Connection
o Do not leave a gap in the sealing agent or overlap the thickness. o IMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the hob from the aperture in future if it needs to be serviced. Sealing strip Clamp Screw... -
Page 17: Entilation Requirements
Conversion for use on LPG and other gases must only be undertaken by a qualified person. For information on the use of other gases, please contact the Baumatic Advice Line. o The hob must be installed by a qualified person, in accordance... -
Page 18: Gas Safety (Installation And Use) Regulations
o This hob is not fitted with a device for discharging the products of combustion. Ensure that the ventilation rules and regulations are followed. o The walls behind and near the hob should be resistant to heat, steam and condensation. o Remember that the quantity of air necessary for combustion must never be less than 2m ³/h for each kW of power (see total... -
Page 19: Gas Adjustment (Conversion To Lpg)
the other burners and observe that the gas pressure complies with the gas standards in force. o IMPORTANT: On completion carry out a gas soundness test. Gas adjustment (Conversion to LPG) work must carried GASSAFE registered engineer. IMPO RTANT: Always isolate the hob fro m the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. -
Page 20: Minimum Flow Adjustment For Hob Gas Taps
Reassemble all the burners carefully; in particular you should m ke sure that the flame spreader is correctly placed on the ner. o IM PORTANT: The minim um flow adjustment process must be completed before the appliance is next used. Minimum flow adjust ment for hob gas taps. -
Page 21: Gas Tap Maintenance
Gas tap maintenance These maintenance operations MUST ONLY be carried out by a GASSAFE registered engineer. IMPORTANT: Before carrying out any maintenance operations, disconnect the appliance from the gas and electricity supplies. a gas tap becomes stiff to operate, then you should proceed as follows: o Remove the control knobs, pan supports, burners, hob fixing... -
Page 22: Electrical Connection
Replacing the mains supply cable the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Depa rtment. The mains supply cable should be replaced in accordance with the following instructions: o Switch the appliance off at your mains supply. -
Page 23: My Appliance Isn't Working Correctly
Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the warra nty card at you receive with the appliance. -
Page 24: Contact Details
Czech Republic nited Kingdom Baumatic CR spol s.r.o. Baumatic Ltd., Průmyslová zóna Sever 696 Baumatic Buildings, 460 11 Liberec 11 6 Bennet Road, Czech Republic Reading, Berkshire RG2 0QX +420 483 577 200 United Kin gdom www.baumatic.cz Sales Telephone (0118) 933 6900...
Need help?
Do you have a question about the BHG642R and is the answer not in the manual?
Questions and answers