Using The Gas Hob; Before First Use; Switching The Hob On; Automatic Ignition With Flame Failure Device - Baumatic BHG300SS User Manual

Using the gas hob

Before first use

IMPORTANT: You should clean the hob surface (see
"Cleaning and maintenance" section).

Switching the hob on

The following symbols will appear on the control panel, next to each
control knob:
= gas off
Large flame: maximum setting
Small flame: minimum setting
o The minimum setting is at the end of the anti-clockwise
rotation of the control knob.
o All operation positions must be selected between the maximum
and minimum position.
o Never select a knob position between the maximum and off
position.
o The symbol on the control panel, next to the control knob will
indicate which gas burner it operates.
Automatic ignition with flame failure safety device
The appliance is fitted with a flame failure safety device on each
burner, which is designed to stop the flow of gas to the burner head in
the event of the flame going out.
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the maximum position.
o If you keep the control knob pressed, the automatic ignition for
the burner will operate.
o You should hold down the control knob for 20 seconds after the
flame on the burner has lit.
10