BLADEZ SX4i Owner's Manual page 14

Fig. 2
(45) Spring washer M-6
(47) Screws DIN 603 M-6x50
(50) Washers M-8 Ø 21
(77) Screws DIN 603 M-8x110
(91) Self locking nuts M-8
(92) Curved washer 8x19
STEP 2
ADJUSTING THE STABILIZER BARS
First, lift the front of the machine and rest it on a prop, such as the packaging that you have
just removed. Bring the front stabilizer bar with wheels (94) to the main body (72) and
positioning the wheels at the front of the unit, Fig.3. Insert the screws (77) and fit the flat
washers (92-17) and self locking nuts (91), and tighten securely. Perform the same operation
to attach the rear stabilizer bar. Lift the rear of the machine slightly and rest it on a prop,
such as the packaging that you have just removed. Take the rear stabilizer with adjustable feet
(75), and line up the dots (3), Fig.3. Insert the screws (77), and fit the washers (92-17) and
nuts (91), and tighten securely. Place the top cover (93). IMPORTANT: It is advisable to
retighten these screws after one month of using the machine.
14
(98) Washers M-8 Ø 19
(99) Screws Allen M-8x20
(105) Screws M-5x20
(107) Screws M-5x15
Combination box spanners
Allen wrench
(6) Screws M-5x10
(7) Screws M-4x15
(11) Washers Ø 17 Ø 25
(16) Screws M-8x20
(17) Spring washer M-8
(18) Washers M-8 Ø 28
(21) Allen screws M-10x78
(27) Washers M-10
(28) Self locking nuts M-10
(44) Flat washers M-6
Ø = diameter
Fig. 3