BLADEZ SX4i Owner's Manual page 18

STEP 9
FITTING THE FOCUS BAR SPINDLE
COVERS
Take the front (104B) and rear (104F)
covers and position them on the main post
(102), Fig.8. Now use the screws (6) and (7)
to attach them to the post.
STEP 10
FITTING THE FOCUS
BAR SIDE COVERS
Position the covers (12B and 12F), marked
on the inside with the letter "R", at the
spindle end with the bars on the right hand
side, as shown in Fig.9. Use screws (6)
and (7) to attach them. Repeat the same
procedure for the other side of the bar using
the covers (12B and 12F) marked on the
inside with the letter "L".
18