Using The On-Screen Menu - IBM E54 Operating Instructions Manual

USING THE ON-SCREEN MENU

1) Menu screen-press the
Select mark
Press the button to move the selection
mark to the desired location.
1 : CO NTRAST
The item presently
being adjusted is
shown.
2) Adjustment screen (example: horizontal position adjustment)
Adjustment icon
End Button
When the button is pressed,
1
the adjustment level is stored,
the adjustment screen is ended
and the menu screen returns.
NOTE: The amount of adjustment depends upon how long you depress the adjustment button. You may have to
tap the button to obtain the desired results.
1 button to display the menu below and exit menus
Adjustment icons
When the
: 2
The selected adjustment screen appears.
CONTRAST BRIGHTNESS
V. SIZE V. POSITION
ROTATION COLOR
DEGAUSS RECALL
1 :
Name of adjustment screen
On the adjustment screen where these two adjustment
icons appear, it is possible to switch between the two
screens by pressing the
2 button is pressed.
H. SIZE
PINCUSHION
LANGUAGE
H. MOIRE
CONTRAST
The adjustment level is shown by both a number
and a bar. It can be varied with the front
buttons.
When the button is pressed, the horizontal
2
size adjustment screen appears.
button.
2
US-5
H. POSITION
TRAPEZOID
DISP. FREQ.
V. MOIRE
: 2