QC0700/QF0800/QF2200/QF2300
Removal of Parts for Cleaning or Sanitizing
Water Level Probe Removal
1. Place the toggle switch in the OFF position, turn
off the water supply and disconnect electrical
power to the ice machin.e.
2. Disconnect water supply line at float valve quick
disconnect by depressing stainless steel lever.
3. Pull up on water level probes to remove.
4. Disconnect wires from water level probes or
control board.
WATER LEVEL
PROBES
Part Number 80-1230-9 10/10
QF0800/QC0700 SHOWN
71