Manitowoc QF0400 Technician's Handbook page 63

Step 6 Refer to chart and premix the correct solution
of cleaner and cool water for your model ice machine.
Model
SN12 SN20
SF0400 SN0450
SF0600 SN0650
SF0900 SN0950
SF1200 SN1250
SF2000 SN2050
Step 7 Remove the top cover from the ice chute and
pour the cleaner/water solution into the evaporator.
Add the entire amount of premixed solution (excess
solution will exit through the overflow tube in the water
reservoir).
Step 8 Replace the ice chute cover and allow the ice
machine to stand for 30 minutes.
Step 9 Turn on the water supply to the ice machine.
Step 10 Move the toggle switch to the ICE position.
The compressor will energize and produce ice with the
cleaning solution.
Step 11 The ice machine will freeze and discharge
the cleaning solution into the bin. Allow the cycle to run
for 15 minutes.
Step 12 Place the toggle switch in the OFF position
and discard all ice produced during the cleaning
process.
Step 13 Turn off the water supply to the ice machine.
Step 14 Place ICE/OFF/CLEAN toggle switch in the
CLEAN position. The dump valve will open and drain
the water from the evaporator and reservoir.
Step 15 Wait approximately 30 seconds (or until the
evaporator is drained) and place the toggle switch in
the OFF position.
Part Number 80-1230-9 10/10
Amount of
Cleaner
Part Number
000000084
2 oz (60 ml)
2 oz (60 ml)
3 oz (90 ml)
4 oz (120 ml)
8 oz (235 ml)
8 oz (235 ml)
Amount of
Water
32 oz (1 liter)
32 oz (1 liter)
32 oz (1 liter)
32 oz (1 liter)
64 oz (2 liter)
64 oz (2 liter)
63