Wireless Setup - Carrier Infinity SYSTXCCITW01 Installation Instructions Manual

The PC/MAC software application to format the dealer logo and contact
information can be found at:
www.MyInfinityTouch.Carrier.com/Infinity/downloads
Download the program and follow the program instructions.
Once the dealer logo and contact information have been properly loaded onto the
USB memory device, insert the USB device into the bottom edge of the Infinityr
Touch Control. The control will prompt you whether or not to upload the dealer
logo. Once complete, you will receive a confirmation that your upload was
successful. If the information was not stored properly on the USB device, you will
receive an error message that the dealer logo was not found. Refer back to the
PC/MAC software application instructions and try again. Once the upload is
complete, touch NEXT.
If you have problems, contact your distributor service manager for support.
7. Wireless and Remote Access Setup (Wi- - Fi Option, only)
The Infinityr Touch Control, when supplied with the Wi- - Fi option, may be
accessed by consumers through the www.MyInfinityTouch.Carrier.com website, or
by dealers through www.HVACpartners.com. The Infinity Touch Control connects
to a home Internet connection through an existing home Local Area Network
58
A12205