Zoning Status; Last 10 System Faults - Carrier Infinity SYSTXCCITW01 Installation Instructions Manual

6.5.5.

Zoning Status

The zoning status screen displays relevant information about the zoning operation.
To return to the previous screen, touch BACK. To exit the Service menus, touch
DONE.
6.5.6.

Last 10 System Faults

This screen will show the last 10 events that occurred throughout the system. Each
entry has the time and date incident recorded. These events are stored in the
memory of the control and are resettable in the THERMOSTAT SETUP screen
under the RESET FACTORY DEFAULT selection. Each entry shows the
52
A12200
A12201