Server Power And Restart Activity - IBM Remote Supervisor Adapter User Manual

Server power and restart activity

The Server Power and Restart Activity section displays the power status of the
server when the Web page was generated.
Power The Power field shows the power status of the server at the time this Web
State
Restart count
Power-on hours
56
Remote Supervisor Adapter: User's Guide
page was generated.
The State field shows the state of the server when this Web page was
generated. Possible states include:
v System power off/State unknown
v In POST
v Stopped in POST (Error detected)
v Booted Flash or System partition
v Booting OS or in unsupported OS (Could be in the operating system if
the operating system or application does not report the new system
state)
v In OS
v CPUs held in reset
v System power on/Before POST
The Restart count field shows the number of times the server has been
restarted.
Note: The counter is reset to zero each time the ASM subsystem is
cleared to factory defaults.
The Power-on hours field shows the total number of hours the server has
been powered on.