Table of Contents
Advertisement
10. Press F3 to return to the Login & Alert Profiles window.
Setting remote alerts
Complete the following steps to select which remote alerts are to be sent by the
Remote Supervisor Adapter:
1. Log in to the Remote Supervisor Adapter. For more information, see "Accessing
2. For an xSeries 330 server: Log in to the ASM processor. For more information,
3. In the Advanced System Management window, select Settings. The Settings
4. In the Settings window, select Login & Alert Profiles.
5. In the Login & Alert Profiles window, select Critical/Warning Remote Alerts. A
the text-based interface through a Telnet connection" on page 65 or "Accessing
the text-based interface through a direct serial connection" on page 66.
see "Accessing remote adapters through an ASM interconnect network" on
page 67.
window opens.
window similar to the one in the following illustration opens.
The remote alerts are categorized by the following levels of severity:
v Critical
v Warning
v System
All alerts are tracked in the event log and sent to all configured remote alert
recipients.
Chapter 7. Configuring your Remote Supervisor Adapter using a text-based interface
81
Advertisement
Table of Contents
