IBM Remote Supervisor Adapter User Manual page 58

52
Remote Supervisor Adapter: User's Guide
Component Activity Log
You can find a record of component activity in this section.
Table 11. Component activity log
Field Function
FRU number Identifies the field replaceable unit (FRU) number (a seven-digit
alphanumeric identifier) of the component.
Serial number Identifies the serial number of the component.
Manufacturer ID Identifies the manufacturer of the component.
Slot Identifies the slot number where the component is located.
Action Identifies the action taken by each component.
Timestamp Identifies the date and time of the component action. The date is
displayed in the MM/DD/YY format. The time is displayed in the
HH:MM:SS format.
In addition, the component activity log tracks the following server
components:
v Power supplies
v DIMMs
v CPUs
v System board
v Power backplane
POST/BIOS VPD
You can find the power-on self-test (POST) or basic input/output system
(BIOS) firmware code VPD for the remote managed server in this
section.
Table 12. POST/BIOS vital product data
Field Function
Version Indicates the version number of the POST/BIOS code.
Build level Indicates the level of the POST/BIOS code.
Build date Indicates when the POST/BIOS code was built.
Diagnostics VPD
You can find the diagnostic code VPD for the remote managed server in
this section.
Table 13. Diagnostics vital product data
Field Function
Version Indicates the version number of the diagnostic code.
Build level Indicates the level of the diagnostic code.
Build date Indicates when the diagnostic code was built.
ASM VPD
You can find vital product data for the Remote Supervisor Adapter or
ASM processor in this section.