IBM Remote Supervisor Adapter User Manual page 76

3. In the Advanced System Management window, select Settings. The Settings
4. In the Settings window, select System. A window similar to the one in the
5. In the ASM Name field, type the name of the Remote Supervisor Adapter.
6. In the System Contact field, type contact information. For example, you can
7. In the System Location field, type the location of the server. Include in this field
70
Remote Supervisor Adapter: User's Guide
window opens.
following illustration opens.
A S M D E M O
Note: Depending on whether you are logged in to the Remote Supervisor
Adapter or ASM processor, some options are not available.
Use the ASM Name field to specify a name for the ASM in this server. This
name is included in e-mail, SNMP, and alphanumeric pager alert notifications to
identify the source of the alert.
Note: Your Remote Supervisor Adapter name (the ASM Name field) and IP
host name of the Remote Supervisor Adapter (the Host name field on
the Network Interfaces window) do not automatically share the same
name because the ASM Name field is limited to 15 characters. The Host
name field can consist of up to 63 characters. To minimize confusion, set
the ASM Name field to the nonqualified portion of the IP host name. The
nonqualified IP host name consists of up to the first period of a fully
qualified IP host name. For example, for the fully qualified IP host name
asmcard1.us.company.com, the nonqualified IP host name is asmcard1.
For information about your host name, see "Configuring an Ethernet
connection to the Remote Supervisor Adapter" on page 87.
specify the name and phone number of the person to contact if there is a
problem with the server. You can type a maximum of 47 characters in this field.
Note: The Contact field is not available for all servers.
sufficient detail to quickly locate the server for maintenance or other purposes.
You can type a maximum of 47 characters in this field.
Note: The Location field is not available for all servers.
A S M D E M O