Regulatory Notices; Unpacking - Baxall Vivid User Manual

Baxall Vivid Digital Video Recorder
Fast Transients and Surge: regardless of the inbuilt protections of the Vivid DVR, Baxall Ltd recommend that
appropriate fast transient and surge protection is fitted to all vulnerable cables, such as video and Ethernet cables
and that other cables, such as s-video cables, SCSI cables, etc., are kept to lengths of less than 3m to minimise risk
of damage to the Vivid DVR or loss of valuable video data.
All installations: Baxall Ltd strongly recommend that for all installations – especially those that may be security
critical, or that are in areas subject to surges, dips, or interruptions in the mains electrical power supply – that a
suitable uninterruptible power supply (UPS) is used to condition and protect the Vivid DVR and its peripherals.
Warning: The primary purpose of this product is to digitise, compress, record and playback CCTV video. The other
secondary features of this product, such as motion detection, alarm handling and audio recording, are provided for
convenience and should not be relied upon as the primary means of meeting requirements for these functions in an
installation.
Lithium battery: The Vivid DVR contains a replaceable lithium battery. This battery must only be replaced by a
suitably qualified service engineer with the same type as originally fitted to the system.
After removal the original battery must be disposed of or recycled in accordance with local government, state or
federal laws.
Warning: Risk of explosion. Do not incinerate the replaceable lithium battery in the Vivid DVR.
FCC (USA Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at their own expense.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC
rules.
CE Mark (EU Only)
The manufacturer declares that the product supplied is compliant with the provisions of the EMC Directive 89/336 EEC, the
Low Voltage Directive 72/23 EEC and the CE marking directive 93/68 EEC and associated amendments. A "Declaration of
Conformity" in accordance with the above directives is held on file at Baxall Limited, Stockport SK6 2SU, England. A copy of
which is available upon request.
This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be
required to take adequate measures.
Check you have the following items included in the Vivid DVR package:
• Vivid DVR
• External power supply unit, with integral 12V power cord
• IEC electrical mains power cord
• 2 rack mounting brackets
• Vivid DVR User manual
• Vivid DVR PC Remote Viewing Software (on CD-ROM)
6
User Manual
IMPORTANT SAFETY NOTICES

REGULATORY NOTICES

UNPACKING