Sequences; Picture In Picture - Baxall Vivid User Manual

Baxall Vivid Digital Video Recorder
The Vivid DVR can display all of the cameras connected to it in sequence. Each camera will be displayed on the active monitor
for a period of time set by the Dwell time parameter. To start camera sequencing:
1. Select a camera (sequencing can start from any camera) by pressing the corresponding number key.
2. Press the sequence key.
To stop seqencing:
1. Press the sequence button, or select a camera for full screen viewing by pressing a camera number key.
The Vivid DVR has a picture-in-picture feature. To activate picture-in-picture (PIP) mode:
1. Press the PIP key.
2. The display will change to the picture-in-picture mode.
To change the size of the PIP:
1. Press the PIP key to change the size of the PIP display. Each press of the PIP key changes the PIP display to one of three
sizes.
To change the position of the PIP display:
1. Use the left/right and up/down arrow keys to move the PIP as shown below.
To change the camera of the PIP display:
To change the camera which is displayed by the PIP, the PIP area of the display (usually referred to as a cameo) needs to be
selected.
1. Press the enter key. This will superimpose a reverse highlighted
below).
20
*
on the main camera display (camera 2 in the example
User Manual

SEQUENCES

PICTURE IN PICTURE