Networking - Baxall Vivid User Manual

Baxall Vivid Digital Video Recorder
Selecting Networking from the Hardware setup menu will open a menu similar to one of the following:
Ethernet enabled
Use DCHP
IP addresses
Email setup
Local domain
Bandwidth limit
Use proxy server
Proxy server
Proxy port
Proxy username
Proxy password
RS485 usage
Dome protocol (RS485)
Dome protocol (Screw)
RS232 setup
MAC address
RS485 useage set to Dome control
Ethernet enabled allows you to enable or disable Ethernet connectivity. Options are Yes or No. If the option is set to Yes,
additional menu items will be displayed.
Use DCHP (only visible if Ethernet enabled is set to Yes) allows dynamic IP addresses to be enabled or disabled. Options are
Yes or No.If yes is selected IP addresses will be obtained automatically; if no, IP addresses must be entered manually.
IP addresses (only visible if Ethernet enabled is set to Yes) allows you to manually set up IP addresses. Selecting this field and
pressing the enter key will open the following menu:
To edit an address, select the field to be edited using the up/down arrow keys and then press the enter key. The selected
address will be opened in a sub menu with the first three numbers selected (IP addresses can only be edited manually if Use
DCHP is set to no):
Use the up/down arrow keys or camera number keys (1 to 9) to change the selected numbers. When finished, use the right
arrow key to select the next three numbers in the address. Again, use the up/down arrow keys or camera number keys to
change the numbers. Carry on in this manner until the address has been fully entered. Press the enter key to quit editing.
Email setup (only visible if Ethernet enabled is set to Yes) allows you to configure the settings required for the Send email
action. To edit the properties, highlight the field and press the enter key. A sub menu similar to the following will appear:
30
Yes
No
baxall.com
50%
Yes
(not set)
8080
(not set)
(not set)
Dome control
Baxall Prodome
Baxall Prodome
IP address 192.168.000.231
Subnet mask 255.255.255.000
Default gateway 192.168.000.250
DNS server 192.168.000.250
NTP servers 130.88.200.98
xxx.xxx.co.uk
(Not set)
(Not set)
(Not set)
192.168.000.231
SMTP server
SMTP port
SMTP domain
From address
Email addresses
Send test mail
Ethernet enabled
Use DCHP
IP addresses
Email setup
Local domain
Bandwidth limit
Use proxy server
Proxy server
Proxy port
Proxy username
Proxy password
RS485 usage
RS485 address
RS485 baud rate
Dome protocol (Screw)
RS232 setup
MAC address
RS485 useage set to External keyboard
207.228.254.011
25
baxall.com
vivid@baxall.com
vivid@baxall.com
(Not set)
(Not set)
(Not set)
(Not set)
User Manual

NETWORKING

Yes
No
baxall.com
50%
Yes
(not set)
8080
(not set)
(not set)
External keyboard
1
9600
Baxall Prodome