Table of Contents
Advertisement
Baxall Vivid Digital Video Recorder
This menu item allows configuration of the monitors that are connected to the Vivid DVR. The top level menu is divided into
Main monitor and Spot monitor. Selecting Main monitor will open a menu similar to the following:
Main Monitor Settings
Full screen interlace interlaced images are made of two fields. In full screen this will give the impression of a higher resolution
and sharper image. Select either Yes or No.
Multiscreen interlace interlaced images are made of two fields. In Multiscreen this will give a sharper image but may appear
to shimmer. Select either Yes or No.
Monitor Type
Select from Overscan or Underscan to suit the type of monitor you are using. The difference between these
two options will produce either a stretched or normal size image to suit the type of monitor used.
Sequenced activates the display to sequence between all the cameras that have been enabled within the Sequence menu.
Select Yes or No.
Sequence (only visible if Sequenced is set to Yes) allows you to select which of the cameras connected to the Vivid DVR will
be included in the sequence when the sequence key is pressed on the front panel. Selecting the field and pressing the enter
key will open a menu similar to the following:
1.
Select a camera using the up/down arrow keys and press enter. Use the up/down arrow keys to select Yes to include the
selected camera in the sequence, or No to omit it. Press the enter key when finished.
2.
Use the up/down arrow keys to select the next camera and follow step 1.
3.
When all the cameras required in the sequence (or not) have been edited, press the left arrow key to exit the menu.
Dwell time (only visible if Sequenced is set to Yes) allows you to select the time period that each camera will be displayed until
the sequence moves on to the next camera. Select the field and press enter. Use the up/down arrow keys to select from 1 to 60
seconds. Press enter to exit.
Show on-screen display turns the on-screen display (date, time, camera names, etc.) on or off.
On-screen display setup (only visible if Show on-screen display is set to Yes). Selecting the field and pressing the enter key
will open a menu similar to the following:
32
Full screen interlace
Multiscreen interlace
Monitor type
Sequenced
Sequence
Dwell time
Show on-screen display
On-screen display setup
On-screen display offsets
Camera1
Yes
Camera2
Yes
Camera3
Yes
Camera4
Yes
Camera5
Yes
Camera6
Yes
Camera7
Yes
Camera8
Yes
Camera9
Yes
Camera10
Yes
Camera11
Yes
Camera12
Yes
Camera13
Yes
Camera14
Yes
Camera15
Yes
Camera16
Yes
Yes
Yes
Overscan
Yes
4s
Yes
User Manual
CONFIGURE DISPLAY
Advertisement
Table of Contents
