Table of Contents
Advertisement
User Manual
The following symbols are used in this manual:
An exclamation mark within a triangle, indicates an important installation, operating or maintenance (service)
instruction. Failure to read and adhere to these instructions may:
•
Be potentially hazardous or operationally risky
•
Result in equipment failure or incorrect operation
•
Possibly invalidate the manufacturers warranty
A lightning flash, within a triangle, indicates that there are un-insulated "dangerous voltages" present that may
be of sufficient magnitude to constitute a risk of electric shock.
The recycling symbol, indicates that an item may need proper disposal or recycling in accordance with applicable
local government, state or federal laws.
Attention: The Vivid DVR is a professional piece of equipment that is designed for use within a commercial environment
for general security and surveillance applications. Installation and service should be performed by suitably qualified
personnel only in accordance with local government, state or federal laws.
Power disconnect: The Vivid DVR has no "on/off" switch. Power is disconnected by switching off the supply to the
Vivid DVR's external power supply unit (PSU) at the mains electrical supply socket and removing the DC power cord
from the back of the Vivid. For this reason, the mains electrical supply socket should be close to, and easily accessible
from the Vivid DVR.
Warning: To reduce the risk of fire or shock, do not expose the Vivid DVR or its PSU to rain or moisture.
Vivid DVR instructions: Read and comply with all the safety, installation and operating instructions for the Vivid
DVR when installing and operating your new system.
Keep all the safety, installation and operating instructions supplied with the Vivid DVR for future reference.
If you are unsure about any aspect of the instructions supplied with the Vivid DVR, please contact your local Baxall
distributor, dealer or installer before proceeding to install, set-up or use the system.
Other equipment instructions: The Vivid DVR cannot be installed and operated without being connected to other
equipment within a complete CCTV system, such as cameras and monitors. Read and comply with all the safety,
installation and operating instructions for the equipment you intend to connect your Vivid DVR to when installing and
operating your system.
If you are unsure about any aspect of the instructions supplied with the equipment you intend to connect to your Vivid
DVR, please contact your supplier.
Ventilation: To avoid the risk of overheating and a reduction in the operating life of the Vivid DVR, ensure that no
ventilation openings in the system are blocked and that the installation instructions contained in this document are
adhered to.
Do not install the Vivid DVR near any heat sources such as radiators or hot air ducts.
Lifting and handling: The Vivid DVR is heavy and may cause injury if incorrectly lifted or handled. Always follow
your local Health and Safety or OSHA guidelines when lifting the Vivid DVR from its package or installing the unit.
Rough handling: The Vivid DVR contains hard disk drives. These are sensitive to shock and easily damaged –
especially when the system is powered up. Rough handling or sharp shocks to the system, whether during installation
or during system use, may damage the hard disk drives and possibly invalidate the system warranty.
Electrostatic-sensitive device: During installation, and especially if working inside the Vivid DVR's chassis, always
use proper antistatic precautions, including correctly fitted wrist straps, to avoid damage to the Vivid DVR or its
internal electronics from unintentional electrostatic discharge.
Baxall Vivid Digital Video Recorder
SAFETY SYMBOLS
IMPORTANT SAFETY NOTICES
5
Advertisement
Table of Contents
