Table of Contents
Advertisement
Baxall Vivid Digital Video Recorder
The Baxall Vivid DVR is capable of controlling PTZ and dome cameras which are connected to it. In order to control such
cameras, the Vivid DVR is used in telemetry mode.
To enter telemetry mode:
1.
Select the PTZ or dome camera connected to the unit by pressing the appropriate camera key.
2.
Press the Enter key then the MON key to activate telemetry mode.
To pan or tilt the camera:
When in telemetry mode, the arrow keys are used to pan and tilt the selected PTZ camera. A single keypress will pan or tilt the
camera at the slowest speed; a double keypress in quick succession will pan or tilt the camera at medium speed; a triple
keypress in quick succession will pan or tilt the camera at high speed. Four key presses in quick succession will pan or tilt the
camera at full speed.
To focus the camera:
When in telemetry mode, the Enter and Menu keys are used to adjust camera focus.
To zoom in or out:
When in telemetry mode, the Event and Go To keys are used to control the zoom in or zoom out function of the camera lens.
To program a preset:
1.
Select the camera, enter telemetry mode and move it to the required postion.
2.
Press and hold a numbered camera key (1 to 6, or 1 to 10, or 1 to 16) to store the preset. The message 'Preset stored' will
be displayed when the preset has been programmed.
Note: The number of presets that can be stored for PTZ/Dome cameras is dependent on the Vivid DVR in use. For example,
a six way unit can store six presets per camera; a 10 way unit can store 10 presets and a 16 way unit can store 16 presets.
Recalling a preset:
1.
Select the camera and enter telemetry mode.
2.
Press the appropriately numbered key (1 to 6, or 1 to 10, or 1 to 16) to recall the required preset.
22
FOLLOWED BY
User Manual
TELEMETRY
Advertisement
Table of Contents
