Table of Contents
Advertisement
Baxall Vivid Digital Video Recorder
VIDEO
Standard
Inputs
Outputs
Image Compression
Resolution
Recording Modes
Recording Quality
Recording Speed
Video Replay
depending upon operating mode.
Internal Video Storage
External Video Storage
Scheduling
AUDIO
Recording
Inputs
Output
ALARM INTEGRATION
Inputs/Relays
plus grounds.
Connections
Alarm Recording
MOTION DETECTION
Matrix
Sensitivity Levels
Tracking Delay
Target Information
System Monitoring
Watchdog
EVENTS (ALARM, MOTION or SYSTEM)
Buzzer
Notification/Action
Log
Log Protection/Expiry
52
PAL / NTSC auto-detect.
6,10 or 16 looped composite BNC connectors (1Vpp – 75 ohm) with software
termination.
Main and spot monitor BNC (1Vpp – 75 ohm) connectors, S-video mini-DIN.
JPEG2000.
720(H)x576/480(V) displayed PAL/NTSC. Up to 720(H) x 288/240(V) pixels recorded
PAL/NTSC, depending on operating mode.
Linear or Looping.
User selectable within a range, depending on operating mode.
User selectable up to a maximum system rate of 50 pps (PAL) 60pps (NTSC).
Simultaneous video recording, local replay and remote viewing,
Up to two 3 1/2 inch ATA hard disk drives.
via SCSI-2, e.g. RAID, or USB 2.0, e.g., CD-RW.
Comprehensive scheduling facilities.
User selectable single channel.
3.5mm Microphone or Line-in (1Vpp).
3.5mm Line-out (1Vpp).
16 inputs, 2 relay outputs (0.5A continuous, 1A momentary, NO/NOC)
3.5mm COMBICON screw terminals.
Programmable: duration (2 – 999 seconds) with optional: priority, interleaved,
exclusive, no change, pre and post alarm recording.
Selectable 14 x 15 matrix.
5 levels.
Programmable 0–5 seconds.
Programmable for size and location.
Monitors key system parameters for power up, power down, camera connection,
camera loss, user login, user logoff, and set-up changes.
Selectable on/off.
Programmable Spot monitor activation. Programmable e-mail notification,
Programmable relay outputs, and On-screen display warning.
Date, time, camera & event trigger.
Separate event partition, programmable storage / archive parameters such as over-
write, write protect against time parameters. Timed event log protection and/or expiry.
User Manual
APPENDIX 8 – SYSTEM SPECIFICATION
Advertisement
Table of Contents
