Alarm Status - Baxall Vivid User Manual

Baxall Vivid Digital Video Recorder
Spot Monitor Settings
Selecting Spot monitor from the Configure display menu will open a menu similar to the following:
All settings available within this menu are exactly the same as for the Main Monitor Settings menu.
These pages allow you to manually acknowledge alarm or motion detection events. The default page shows information for
Alarm events. Selecting Motion on this page opens a similar page detailing motion detection events. A typical alarm status
page is shown below.
To manually clear an alarm
1. Used the up/down arrow keys to select the alarm or motion event to be cleared (if there is more than one)
2. Press the enter key to clear the selected alarm or motion event.
3. The 'In progress' caption will change to 'Manually cleared'.
34
Monitor type
Sequenced
Sequence
Dwell time
On-screen display setup
On-screen display offsets
1 Alarming Timed Out
2 Alarming In progress
3 Disabled -
4 Disabled -
5 Disabled -
6 Disabled -
7 Disabled -
8 Disabled -
9 Disabled -
10 Disabled -
11 Disabled -
12 Disabled -
13 Disabled -
14 Disabled -
15 Disabled -
16 Disabled -
Back to menus
Overscan
Yes
4s

Alarm Status

Clear alarm
Motion
User Manual
CONFIGURE DISPLAY
ALARM STATUS