Connecting To A Bluetooth Device; Selecting Profiles On The Bluetooth Device; Unpairing A Bluetooth Device; Pairing With The Cs3070 - Motorola TC55 User Manual

122 | Wireless
7 Enter a name and touch Done.
8 Touch
.

Connecting to a Bluetooth Device

Once paired, connect to a Bluetooth device.
Procedure:
1 Touch
.
2 Touch
.
3 Touch
Bluetooth.
4 If Bluetooth is not on, slide the switch to the ON position.
5 In the PAIRED DEVICES list, touch and hold on a unconnected Bluetooth device until a menu appears.
6 Touch Connect. When connected, the device is displayed as connected in the list.

Selecting Profiles on the Bluetooth Device

Some Bluetooth devices have multiple profiles. To select a profile:
Procedure:
1 Touch
.
2 Touch
.
3 Touch
Bluetooth.
4
In the PAIRED DEVICES list, touch
5 Under PROFILES, check or uncheck a profile to allow the device to use that profile.
6 Touch
.

Unpairing a Bluetooth Device

To unpair a Bluetooth device and erase all pairing information:
Procedure:
1 Touch
.
2 Touch
.
3 Touch
Bluetooth.
4
In the PAIRED DEVICES list, touch
5 Touch Unpair.
6 Touch
.

Pairing with the CS3070

Procedure:
1 Press the CS3070 scan button (+) to wake the scanner.
2 Press and hold the Bluetooth button (round button with Motorola logo) for five seconds. The scanner beeps and
the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host.
Note:
HID is the default profile for the CS3070. If this was changed, scan for bar code below.
September 2013 | MN000015A01
next to the device name.
next to the device name.