94 | Applications
Figure 76: DataWedge Demonstration Window
Table 9:
Icon
Description
Toggles the flash on and off when using the camera to capture bar code data. Use the flash in
/
dimly lit areas.
Toggles the data capture function between the imager and camera. If the TC55 does not have an
/
imager, only camera icon is active.
Toggles between normal scan mode and picklist mode when using the camera to capture bar
/
code data.
Opens a menu to view the application information or to set the application DataWedge profile.
Note:
See the TC55 Integrator Guide for information on DataWedge configuration.
Either press the programmable button or touch the yellow scan button to enable data capture. The captured data
appears in the text field below the yellow button.
Sound Recorder
Use Sound Recorder to record audio messages.
Recordings are saved on the microSD card (if installed) or the Internal Storage and available in the Music application
playlist titled "My Recordings."
September 2013 | MN000015A01