114 | Wireless
Configuring a Wi-Fi Network
Procedure:
1 Touch
.
2
Touch
.
3 Touch
Wi-Fi.
4 Slide the switch to the ON position.
5 The TC55 searches for WLANs in the area and lists them on the screen.
6 Scroll through the list and select the desired WLAN network.
7 Touch the desired network. If the network security is Open, the TC55 automatically connects to the network. For
all other network security a dialog box appears.
Figure 95: WLAN Network Security Dialog Boxes
Note: By default, the network Proxy is set to None and the IP settings is set to DHCP. See
for a Proxy Server on page 115
to Use a Static IP Address on page 116
8 If the network security is WEP or WPA/WPA2 PSK, enter the required password and then touch Connect.
9 If the network security is 802.1x EAP, enter the information below and then touch Connect:
•
Touch the EAP method drop-down list and select PEAP, TLS or TTLS.
•
Touch the Phase 2 authentication drop-down list and select an authentication method.
•
If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are
installed using the Security settings.
•
If required, touch User certificate and select a user certificate. Note: User certificates are installed using the
Location & security settings.
•
If required, in the Identity text box, enter the username credentials.
•
If desired, in the Anonymous identity text box, enter an anonymous identity username.
•
If required, in the Password text box, enter the password for then given identity.
10 Touch
.
September 2013 | MN000015A01
for setting connection to a proxy server and see
for setting the device to use a static IP address.
Configuring
Configuring the Device