66 | Using the TC55
Figure 50: Three Button Reset
2 The TC55 shuts down and then reboots.
Suspend Mode
The TC55 goes into suspend mode when the user presses the Power button or after a period of inactivity (set in the
Display settings window).
To wake the TC55 from Suspend mode, press the Power button.
The Lock screen displays. Slide
is enabled, the Pattern screen appears instead of the Lock screen. See Un-Locking the Screen.
Note:
If the user enters the PIN, password or pattern incorrectly five times, they must wait 30 seconds before
trying again.
If the user forgets the PIN, password or pattern contact the system administrator.
Figure 51: Lock Screen
September 2013 | MN000015A01
to the right toward
to unlock the screen. If the Pattern screen unlock feature