Answering Calls With A Bluetooth Headset; Call Settings; Figure 62: Incoming Call Screen - Motorola TC55 User Manual

Answering Calls with a Bluetooth Headset

When you receive a phone call, the Incoming Call screen opens, displaying the caller ID and any additional
information about the caller that is in the People application.

Figure 62: Incoming Call Screen

All incoming calls are recorded in the Phone application Call log tab. If you miss a call, you receive a notification. To
silence the ringer before answering the call, press the volume down button on the side of TC55.
When a call arrives, touch the Call button on the Bluetooth headset to answer the call..
To end the call press the Call button on the Bluetooth headset.

Call Settings

Use the Call Settings to modify options related to the phone call feature.
• Ringtone
- Phone ringtone - Touch to select a ringtone to sound when an incoming call is received.
- Vibrate when ringing - Check to make the TC55 vibrate when a call is received.
• Other Call Settings
- RingPath Settings - When using a Bucktooth headset, select the path that the ring is heard. Options:
Bluetooth or Speaker and Bluetooth (default). Note: Bluetooth headset connection is required to set this
option.
- Voicemail - Touch to configure voicemail settings.
+ Service - Set the service provider or other provider for voicemail service.
+ Setup - Touch to update the phone number used to access voicemail.
+ Ringtone - Touch to select a ringtone to sound when a voicemail is received.
+ Vibrate - Touch to select vibrate option. Options: Always, Only when silent or Never (default).
- Text message service center - Touch to update the phone number used to access text messages.
- Dial pad touch tones - Check to play a sound when a phone key is touched.
Calls | 75
MN000015A01 | September 2013