Bluetooth Power States; Bluetooth Radio Power; Enabling Bluetooth; Disabling Bluetooth - Motorola TC55 User Manual

120 | Wireless
• Audio/Video Remote Control Profile (AVRCP) - Allows the TC55 to control televisions, hi-fi equipment, etc.
• General Object Exchange Profile (GEOP) - Provides a basis for other data profiles. Based on OBEX and
sometimes referred to as such.
• Handsfree Profile (HFP) - Allow car hands-free kits to communicate with mobile phones in the car.
• Personal Area Network (PAN) - Allow the use of Bluetooth Network Encapsulation Protocol on Layer 3 protocols
for transport over a Bluetooth link.
• General Audio/Video Distribution Profile (GAVDP) - Provides the basis for A2DP, and VDP.
• PhoneBook Access Profile (PBAP) - Allows exchange of Phone Book Objects between a car kit and a mobile
phone to allow the car kit to display the name of the incoming caller; allow the car kit to download the phone book
so the user can initiate a call from the car display.

Bluetooth Power States

The Bluetooth radio is off by default.
• Suspend - When the TC55 goes into suspend mode, the Bluetooth radio stays on.
• Airplane Mode - When the TC55 is placed in Airplane Mode, the Bluetooth radio turns off. When Airplane mode
is disabled, the Bluetooth radio returns to the prior state. When in Airplane Mode, the Bluetooth radio can be
turned back on if desired.

Bluetooth Radio Power

Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the
radio is off, other Bluetooth devices cannot see or connect to the device. Turn on the Bluetooth radio to exchange
information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity.
Note: To achieve the best battery life turn off radios when not in use.

Enabling Bluetooth

Procedure:
1 Touch
.
2 Touch
.
3 Slide the Bluetooth switch to the ON position.
4 Touch
.

Disabling Bluetooth

Procedure:
1 Touch
.
2 Touch
.
3 Slide the Bluetooth switch to the OFF position.
4 Touch
.

Discovering Bluetooth Device(s)

The TC55 can receive information from discovered devices without pairing. However, once paired, the TC55 and a
paired device exchange information automatically when the Bluetooth radio is on. To find Bluetooth devices in the
area:
Procedure:
1 Ensure that Bluetooth is enabled on both devices.
September 2013 | MN000015A01
also appears in the Status bar.