Table of Contents
Advertisement
Mounting the UPS in a Rack
Note: Illustrations in this document might differ slightly from your hardware.
Step 1
Connect the display bezel.
Rear: Connect
Step 3
To lighten the UPS, remove the battery mod-
ule before mounting.
Attention: The battery module is heavy.
Philips Pan Head
8-32 x .375"
x 3
Installing and Connecting the Battery and Attaching the Front Bezel
Step 1
Reinstall the battery.
Philips Pan Head
8-32 x .375"
x 3
Step 2
Attach the mounting brackets.
Flat Head
8-32 x .375"
x 4
Step 4
Install the UPS at or near the bottom of the
rack. Make sure the rack will not tip.
Custom Hex Head
10-32/ M6 x .5"
x 4
Step 2
Connect the battery to the UPS, and attach
the front bezel.
(A)
1
2
(B)
6
Advertisement
Table of Contents
