IBM 1000 VA LCD Installation And Maintenance Manual page 46

To replace the battery module, complete the following steps:
1. Remove the uninterruptible power supply front bezel:
2. Loosen the thumbscrew on the metal battery cover and lift up to remove the
36
1000 VA and 1500 VA LCD Tower UPS: Installation and Maintenance Guide
a. Press up on the two latches to release the front bezel 1 and pull up 2 .
Note: A ribbon cable connects the front bezel to the uninterruptible power
supply. Do not pull on the cable or disconnect it.
b. Carefully rotate the front bezel 180° and place it on top of the uninterruptible
power supply 3 .
cover.